Router Basic Configuration | Tips

Lifedigital teach you In the basic configuration of Basic Router. And here 4 things we need to understand are IP Address, Default Route, NAT (Network Address Translation), and DNS (Domain Name Server).

Router Basic Configuration | Tips Life Digital

IP Address (Internet Protocol Address ) or we call IP is a series of binary numbers between 32 bits to 128 bits that are used as identification addresses for each host computer in the Internet network. The length of this number is 32 bits (for IPv4 or IP version 4), and 128 bits (for IPv6 or IP version 6) which shows the address of the computer on a TCP / IP-based Internet network.

Default Route – The default route is a route that is considered to match all the destination IP addresses. With the default route when the destination IP address of a packet is not found in the routing table, the router will use the default route to forward the packet.

NAT (Network Address Translation) is a process of mapping IP addresses where computer network devices will assign public IP addresses to local network devices so that many private IPs can access public IPs.

DNS (Domain Name Server) is a server that is used to find out the IP address of a host through its host name. In the internet world, computers communicate with each other by recognizing its IP Address.

So the 4 basic that we need to know and understand about the basic configuration of the router. If we already know these 4 things regardless of the router product, such as cisco, juniper, MikroTik, etc. we will easily configure it. May be useful. Good luck.

News Reporter

Leave a Reply

Your email address will not be published. Required fields are marked *